![]() ![]() Step 6: Secure the Fuse PanelĪfter all of the new fuses have been inserted, use a flathead screwdriver to tighten down all of the screws on the fuse panel. Be sure to match them up with their respective positions so they work properly. Once you’ve identified which fuses need to be replaced, use the needle nose pliers to insert the new fuses into the fuse panel. Step 5: Replace the Christmas Light Fuses If the metal at the end of the fuse has melted or is cracked, then it needs to be replaced. Inspect the old fuses to determine if they need to be replaced. Be sure to keep track of which ones go where so you can replace them in the same position. Using a pair of needle nose pliers, carefully remove the old fuses from the fuse panel. Once you find it, use a flathead screwdriver to loosen the screws and open up the fuse panel. The fuse panel is located on the plug end of the Christmas lights. This includes both indoor and outdoor outlets. How to Change Fuse in Christmas Lights? Step 1: Unplug the Christmas Tree Lightsīefore you begin, make sure to unplug your Christmas tree lights from any power source. If you find any problems, then it is best to replace the entire strand rather than attempting any repairs yourself. In this case, you should inspect the socket and wiring to check for any loose connections or exposed wires. If none of the above issues are present, then it is possible that there could be a problem with the socket or wiring of your lights. To solve this issue, you may need to clean out any dirt or corrosion before being able to use your lights again. This is usually associated with old lights that have been used for some time, and the connection between the bulb and socket has become filled with dirt or corrosion. Corroded SocketĪ corroded socket can also be a cause of Christmas light failure. Fortunately, most Christmas light strands are designed with removable bulbs, so it should be fairly straightforward to identify and replace any faulty bulbs. ![]() In this case, you may need to replace the bulb before being able to use them again. This will usually cause the entire strand of lights to stop working, as the current cannot pass through the defective bulb. The process for replacing a fuse in Christmas lights isn’t overly difficult, and it can often be done quickly once you know what to do.Īnother common issue that can occur is a defective bulb. ![]() If this happens, then you will need to replace the fuse before the lights can be used again. Fuses are safety mechanisms that will blow if there is too much current running through the Christmas lights. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |